Posted in: Construction, Home & Lifestyle

Plumbing Tips: Installing a Sink in Your Bathroom

Bathtub Installation is generally one of the harder projects performed in a bathroom remodeling job. You have to first lay a waterproof, mold-proof subfloor over the floor where you will place your bathtub. Then, you have to insulate the room around the bathtub, as well as the space around the bathtub itself to maintain water temperature. The last step is to install the bathtub, paying special attention to any plumbing connections and hidden drains, and to finish up by putting a new fancy finish on the tub.

Bathroom jet installation is another difficult bathtub installation task. Jets are essential for creating an open bathtub experience, since it’s nice to be able to float in the warm water without feeling bogged down by a hard surface. Jet installation typically involves four steps: installation of the plumbing drain and trap, waterproofing the drain and trap, installation of the foam insulation core, and final surface coating. It can be tricky to get the job right, which is why it’s best to leave it to a bathroom remodeling specialist to do it for you.

Basic Bathtub Installation begins with plumbing and drain line set up. The first step is to prepare the area by sealing the perimeter walls and securing the floor to the sub-floor with plywood or drywall. Next, locate the drain pipes under the drain line, and make sure they’re correctly positioned and securely in place. Then, mark the drain openings with a flexible rubber pipe liner or a flexible metal pipe tape, and screw the drain outlet to its corresponding flange on the wall. Finally, secure the floor to the sub-floor by stapling or gluing a silicone sealant to the floor joists, which will prevent water from the bathtub soaking into the floor and causing damage.

Next, install the foam insulation core to the tub’s surface, then screw on the trap and the drain connector. Finally, use a level to ensure that the walls are square and that the trap is securely in its place. If the bathtub installation is particularly difficult, it’s best to hire a professional plumber for this task. When choosing a plumber, check for his or her background and reputation, and ask for a sample of their work to check out whether or not your bathtub will have an easier time with the installation.

The final step of installing a new bathtub is waterproofing the surface to prevent mold, mildew, and damage to the plumbing. For this job, it’s best to choose plumbers that have experience in installing bathtubs so that they’ll know how best to waterproof the area. Most plumbers install the new fixtures using a special rubber tube and caulking to seal the edges and corners. Some even place a waterproof vinyl liner beneath the surface to protect it from moisture. Once this is applied, plumbers install the trap, water-tighten the floor, and use a rubber mallet to pound in the last couple of inches to set everything in place.

Installing a soaking tub in your home isn’t too difficult, but it does take a fair amount of skill and knowledge. When installing one of these structures, remember that the average price for an average size one is roughly $500. With all of these pieces, it’s very important to hire the right kind of plumbers for the job so that things go as smoothly as possible. Choosing the right one to complete your bathtub installation can make all the difference in the world. To find out more about bathroom remodeling visit click here.